/* UIDIGI Configuration source file Version 1.9 BETA 3 20040101 Written by Marco Savegnago IW3FQG Edited by F4BFX on 28.12.2008 (based on V1_9.txt F6BIG-4 configuration file) and mostly on http://www.qsl.net/n8deu/uidigi_eprom_settings.htm F1ZYB-3 Updated 28.12.2008 Création fichier Uidigi F1ZYB-4-->F1ZYB-3 à compiler uniquement avec la nouvelle version de UIDGCFG.EXE */ //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Set the digipeater ax.25 address callsign (SSID allowed) // Up to 6 characters+SSID // Digicall [t] DigipeaterCallsign = F1ZYB-3 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Set the digipeater address alias // Up to 6 characters (NO SSID) // DIGIAlias [t] DigipeaterAlias = UIDIGI //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Digipeater Info Text up to 80 char // Info [t] // 12345678901234567890123456789012345678901234567890123456789012345678901234567890 InfoText = Station automatique non desservie JN26RE //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Path used when SSID routing is used (Up to 8 hops) // (Direction) Path // xpath [path] NorthPath = SouthPath = EastPath = WestPath = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // BudList Calls (up to 8 calls, default none) // All SSID's of base call will be ignored // BUdlist [calls] BudList = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UI Generic Calls (up to 8) // Calls recognized by digi to repeat // Default (RELAY, WIDE, TRACE) // Uidigi [calls] UIDigiCall = WIDE7-7, WIDE6-6, WIDE5-5, WIDE4-4, WIDE3-3, WIDE4-1, WIDE5-2, WIDE6-3, WIDE7-4 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UI Flood Call (up to 6 characters) // Default (WIDE) // UIFlood [call] UIFloodCall = HS //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UI Trace Call (up to 6 characters) // Default (TRACE) // UITrace [call] //*** as explained in mail from vk3jfk: if let blank, the firmware puts TACE UITraceCall = WIDE //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Txdelay (default 30 = 300) // range 1-255 x10ms // TXdelay [n] TxDelay = 40 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Fullduplex (default 0) // Enables (1) or Disables (0) // NO COMMAND FROM CONSOLE FullDuplex = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // PPErsistence (default 64) // range 1-255 // Parameter fo channel access timing // PErsistance [n] PPersistance = 255 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Slottime (default 10) // range 1-255 x100ms // SLottime [n] SlotTime = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Frack (default 5) // range 1-15 // Frack [n] Frack = 5 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Maxframe (default 4) // range 1-7 // MAxframe [n] Maxframe = 4 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Retry (default 10) // range 0-127 // RETry [n] Retry = 10 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // RespTime 2 (default 100) // range 0-6000 ms // RESPtime [n] RespTime = 100 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Link Check (default 18000) // range 0-65535 ms // CHeck [n] LinkCheck = 18000 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Duplicate Packet Suppression Interval second (default 28) // range 0-180 seconds // UICheck [n] DuplicateSuppression = 60 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Loop Packet Suppression Interval Mask (default 3) // 0x01 = Do not repeat frame with source address equal to digipeater call or alias // 0x02 = Do not repeat frame with the digipeater call in the already digipeated via list // range 0-3 // UILoop [n] LoopSuppression = 3 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Treat different SSID in destination call (default 1) // Enables (1) or Disables (0) UISSID digipeating mode // Used for SSID Directional routing // UISsid [n] HandleUISSID = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Reply to Query (default 1) // Enables (1) or Disables (0) ?APRS? response query // UIQuery [n] ReplyToQuery = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UIFLOOD Algorithm flag (default 0) // bit 0 make call substitution after the last WIDEn-n digied // bit 1 insert callsign before WIDEn-n // UIFLDfl [n] UIFLOODOptions = 4 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // UITRACE Algorithm flag (default 0) // bit 0 makes call substitution after the last TRACEn-n digied // bit 1 Disables // UITRFl [n] UITRACEOptions = 2 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Make call substitution when repeat frames addressed to UIDIGI Callsign // default (1) // Enables (1) or Disables (0) UIDIGI callsign substituion for UIDIGI calls // UIDCsb [n] UIDIGICallSubstitution = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Preempt calls (default none) // see docs PreemptCalls = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Preempt add (default none) // see docs PreemptAdd = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Preempte Digipeater (default 0) // see docs PreeemptedDigipeat = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Don't change SSID (decrement) to UI Message (frame with info that start // with char '~' default (1) // 0 disables // range 0-1 // UIMessage [n] UIMessage = 1 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Process only UI Frame (default 1) // Enable processing of UI frame only // 0 disables // range 0-1 // UIOnly [n] UIOnly = 0 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // PID of processed frames (default 240) // Enable frame filtering algorithm base on PID of frame // 0 disables // range 0-255 // UIPid [n] UIPID = 240 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Sysop Password up to 80 char // NO CONNAMD FROM LOCAL CONSOLE SysopPassword = ************************* // // //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Beacon x interval Seconds // default 1 = 600 // default 2 = 1800 // default 3 = 3600 // range 0-65535 seconds // BEacon [x] [n] Beacon1Interval = 600 Beacon2Interval = 1800 Beacon3Interval = 3600 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Beacon x offset (default 0) // range 0-65535 seconds // BEACONOffset [x] [n] Beacon1Offset = 65 Beacon2Offset = 95 Beacon3Offset = 115 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Digipeater Beacon x Text up to 70 char // see APRS reference doc for layout // BText [n] [t] // 1234567890123456789012345678901234567890123456789012345678901234567890 //Beacon1Text = !0000.00N/00000.00W# (APRS DIGI UIDIGI 1.9B3) 1 Beacon1Text = !4610.31NV00529.42E#PHG3100/B1 Digi Col de Berthiand Dept 01 //Beacon2Text = !0000.00N/00000.00W# () 2 Beacon2Text = !4610.31NV00529.42E#PHG3100/B2 W2 UIDIGI 1.9b3 F1ZYB_déc08 //Beacon3Text = !0000.00N/00000.00W# () 3 Beacon3Text = !4610.31NV00529.42E#PHG3100/B3 sysop f4bfx@neuf.fr //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Destination ax.25 address of beacon (6 characters + SSID) // See APRS working group documentation APNUnn // UNproto [t] BeaconDestination = APFD01 //----------------------------------------------------------------------- //----------------------------------------------------------------------- // AX.25 Beacon x path (up to 8 hops) // Path that Beacon x will be sent out with // Bdl [x] [path] Beacon1Path = NULL Beacon2Path = WIDE2-1 Beacon3Path = WIDE2-2 AuxPath = //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Destination ax.25 address of aux input device string // Up to 6 characters + SSID AuxDestination = AUX //----------------------------------------------------------------------- //----------------------------------------------------------------------- // Aux Beacon interval (default 0) // Sets the interval for the beacon of aux input data // AUXRate [n] AuxRate = 0 //----------------------------------------------------------------------- //-----------------------------------------------------------------------